I do.

Do you love the price of old metal signs?

I do not.

Plus, what are the odds that it’ll be just the right size and color?  Not good, friends…not good.

So, when I had the idea to put one on Macy’s pallet headboard, I knew I’d have to DIY it.

My first stop was the ducting section at Lowe’s.

They sell metal sheets elsewhere in the store (near the plexi glass), but they’re about 2-3 times as much.  Is it “nicer” metal?  Probably, but we don’t need nice for this project.

The sheet measured 24” X 36”, but I wanted a slightly different size.  I cut about 2.5” off one of the long sides so my piece was 21.5” X 36”. You can score with a razor blade/utility knife and then snap the metal along the line, but it takes some SERIOUS patience and massive amounts of scoring.  I went the quick route and used tin snips (WEAR GLOVES) and then used a file to smooth the edge (WEAR GLOVES).

I liked the look of a metal border, so I taped off the edges and then I applied some yellow paint.  I used Jonquil from the new Martha Stewart Crafts by Plaid line.  That paint works on pretty much any surface, including metal.  You don’t need a great coat, because you’re going to sand it and beat it up.  Make sure it’s mostly covered, though.  Peel off the tape and sand.  I used an electric sander with 220 grit.  If you’re doing it by hand, you could use rougher paper (lower grit #).  Here’s a shot after I had sanded:

I put the tape back on and applied some vinyl, cut with my Silhouette CAMEO™, in the center in the shape of a vintage Chevrolet logo.

I traced the center part manually in the Silhouette Studio® Designer Edition software and then used the font “Hood Ornament” to add the lettering.  It’s not quite the same font that Chevy actually used, but only true car dorks would know that.

Once the vinyl was applied, I put on a coat of Martha Stewart Crafts by Plaid paint in carrot.

After I peeled off the tape and vinyl:

And then I sanded some more.  Once I was happy with it, I mounted it to the headboard with a screw in each corner.

I will probably go back and put a clear coat on it, but it’s cold today and I’m a wuss. 

Coming off the awesome insanity that was SNAP! = Mother’s Day totally sneaking up on me

Fortunately, I had all this Martha (yes, THAT Martha) goodness to inspire me:

Available at Michael’s and now also at JoAnn’s

If you haven’t already, you MUST check out the Martha Stewart Crafts by Plaid paints.  You can use them on virtually any surface (glass, metal, wood, terracotta, etc) and the colors/finishes are FAB.  And don’t even get me started on the tools!  The tops that screw directly onto the paint bottles make me WAY happier than they should.

So, what’d I make?  A sophisticated beachy sign/piece of art with my favorite mom saying:

I started out with a board from the hardware store (cheap…$7 or so) that I had BC cut down a bit and 3 colors of paint.

The one on the left is called Sea Lavender (I don’t know).  The one in the middle is Beach Glass.  And, the one on the right is Sterling.

I did a very thin coat (watered it down…is that called a wash?) of the Sea Lavender over the whole board.

Then I picked out one of the stencils, a damask-y pattern from the Flourish set

and used some stencil adhesive spray and the foam pouncer tops

and I did some stenciling.

I applied the Sterling first

and then layered on the Sea Glass.

Once it was dry, I gave it a light sanding.  I wanted it to look old and faded.

The last step was to add the lettering.  I cut the phrase out of vinyl and removed where I wanted the paint to be and then applied it to my board.

I used the Sea Glass with the foam pouncer top to fill in the vinyl stencil as well.

Are you making a Mother’s Day gift for someone that has mothered you?

Will you tell me what it is?  (This isn’t actually for my mom…she reads my blog!)

Find my post disclosure here.

· Twitter: http://twitter.com/plaidcrafts (@plaidcrafts)

· Facebook: http://facebook.com/InspiredByPlaid

· Pinterest: http://pinterest.com/plaidcrafts

There’s a crate shop involved.

This crate shop is the source of LOTS of scrap lumber.  And pallets.

So, when I couldn’t figure out a way to make my initial dreams of a corrugated metal headboard be non-tetanus inducing, I decided to go the free route and use some pallet wood.  I thought the rustic wood would be a nice contrast to the white board and batten and that it would go well with the vintage car vibe we’re going for, too.

BC came home with a double sided 42” pallet.  Apparently both of those characteristics are rare?  (Shipping dork alert!)  I loved the look of it so much that I decided not to rip it apart.

I found this fabulous light at Lowe’s in the outdoor lighting section:

I bought a cord kit and wired the light to work as a plug in.  I’m not going to tell you how to do this, because I’m not an electrician.  You should probably consult one before you do this. 

I mounted the light to the pallet and loved it

but it needed some height.

I went for another cheap and easy solution.

BC cut me three 17” pieces of a 4X4 and a 42” long piece of 2X4.  We screwed the legs (the 4X4) to the 2X4 and then mounted it to the bottom of the pallet.

See?

The bed frame will be bolted directly into the 4X4’s.

Whether or not I stain/paint/something that wood to make it the same color as the pallet has yet to be decided.  It’ll probably depend on how visible it is once there’s bedding on the bed…that’s how I roll.  I’m also pondering another potential addition to the headboard involving something I got in the ducting section at Lowe’s.

In the mean time, I wanted to remind you all about the $100 Lowe’s gift card giveaway I’m running through noon tomorrow.  GO HERE to enter.

And while you’re waiting to see what else I’ve done to the room/if you’re the lucky gift card winner, head on over for your FREE Subscription to Lowe’s Creative Ideas Magazine:

Disclosure:  Lowe’s provided me with a gift card for this month’s room makeover challenge.

Kid bathroom?  Dr Seuss-y and I love it.  Don’t want to change that one yet.

Master bathroom?  Has a wall that doesn’t go all the way to the ceiling, which means that any painting would have involved also painting my entire master bedroom.  Last time I did that by myself it took 5 whole days.  And, if I picked a color that didn’t work with my existing bedding…  You see the size of project this could have turned into, right?

Powder room?  Like one square yard.  You can’t get in there to photograph (we bloggers worry about these things) and I just redid the mirror in the last couple of months.  Plus, there’s not really space for anything other than the toilet and the pedestal sink.

So, the basement bathroom it was, in spite of the fact that there’s no natural light (back to that thing where we bloggers worry about our pictures ).

Truthfully, I NEVER use this bathroom.  As in, I have never ever ever bathed/showered down there (in 5.5 years) and maybe use the toilet portion once a month.  My kids have get to clean toilets when they talk back, so I can’t even think of the last time I was down there to clean it.  Once I got down there, I realized that this should have been my obvious choice from the get go.

The towel bar had been ripped off by a kid doing chin ups.  The wall patches hadn’t been painted.  The toilet paper holder was broken and no longer able to actually hold toilet paper.  The kick place on the cabinet had fallen off.  And don’t even get me started on that wall color.  When I showed a friend the before picture, she called it “cat turd brown”.  Let’s also not talk about what happened when someone washed the formerly white rug with the towels:

I was not a fan of the light fixture either…too pointy or something.

So, I headed to Lowe’s for some inspiration.

I don’t have a way before picture of the towel rack situation, but you’ll just have to imagine that it was pulled completely off the wall based on the super human girth strength of one or more of my children. Because it had been securely drywall anchored in place (after the first time it came down), A LOT of the wall came out with it.  Instead of replacing a huge chunk of drywall, I decided to come up with another option for towel hanging.  I found this coat rack in the closet/garage/organization section at Lowe’s and thought it would be perfect:

I picket up a new toilet paper holder and a light fixture and then headed back to get some molding to frame the mirror.  I also picked up 398472 paint samples.

(That fabric is a laminated cotton from Riley Blake that I’ll be using for the new shower curtain.  That tutorial will be over on the Riley Blake blog in March.)

I went with a color called Modest Silver from Valspar and it is PERFECT.

When I went back to get the paint, I got some Liquid Nails (to fix the kick plate), painter’s tape, garbage bags (to wrap the toilet so I could paint behind it), white silicone (to adhere the frame to the mirror), spackle (I like the kind that goes on pink and turns white as it dries) and assorted cleaning supplies (because I really have no idea when that tub was last cleaned).

The other thing I want to mention about this makeover is that I did it entirely by myself…no husband help at all.  I’m not telling you this to mock him (he he he ), just so that you’ll know that YOU CAN DO THIS BY YOURSELF!

Want to see some after pictures?

(Keep in mind the shower curtain isn’t finished yet, so the fabric is just sort of draped over the rod.)

Kick plate glued back in place:

Toilet paper holder replaced:

Paint applied (and Cheetos eaten):

Light fixture swapped:

Coat rack turned towel rack installed:

Mirror framed:

I gave everything a good scrubbing, too, and voila!  A much more pleasant bathroom!

Don’t forget to pick up a FREE Subscription to Lowe’s Creative Ideas Magazine:

You can also find Lowe’s Creative Ideas on Facebook.  (They’ve moved, so if you “liked” them before, you should “like” them again!)

And, now there’s a Lowe’s Creative Ideas blog.  Go have a look around.  You might recognize a face or two.

Disclosure:  Lowe’s provided me with a gift card for supplies for my bathroom makeover.

We’ve had some great shelving in there since we finished our basement 5 or 6 years ago…

Super old crappy picture alert:

but the fabric bins were just not working out for us.  I had little kids when I bought them, and only one boy old enough to play with toys.  Since that time I’ve discovered something:  Those cloth bins do not hold up to little boys…at least not mine.  We had an incident with scissors where some of the handles were snipped  Several others were missing bottoms.  Pretty much all of them were bent in weird places.  And, there was no way to label them.

So, here’s my industrial boy friendly organization solution:

PAINT BUCKETS!

I found these buckets at Lowe’s in the paint department.  They’re $6.57 each, so not a whole lot more expensive than the cloth bins.  They fit perfectly in my shelving (Pottery Barn Kids) and would also fit in ClosetMaid or IKEA stuff as well…anything where the holes are 12” X 12” or larger.

I also wanted my buckets labeled, and I wanted them labeled in a way that could be changed, because in a year or two we’ll be out of the Little People phase and have 5 buckets of Legos.  I thought about vinyl, but I wanted it to be easier to change than that.  My solution?

Chalkboard paint.

I traced an oval onto some contact paper and then cut it out, leaving the edges in tact.

Here’s my oval template, but really…it’s just an oval.  Find something and trace it.

I applied the contact paper to the buckets as a stencil.  It’s a little bit tricky because of the slope of the bucket, but go slowly and make sure to seal the edges tightly.

DO NOT SKIP THIS NEXT STEP:

Prime the bucket with primer for metal.  If you don’t, the paint will peel right off.

Apply 2 or 3 thin coats of chalkboard paint.  I like to alternate between vertical and horizontal coats to minimize brush lines.

Carefully remove your stencil and then label your buckets as desired.

Easy and customizable!

Random questions I always get asked when I post pictures of my playroom:

What color is your paint?

It’s called Apple 2 and I got it at Lowe’s.  It’s pretty much my favorite light green ever.  I used Apple 1 in another room in the house, even.

Are those rain gutters?

Yes. Yes they are.  I put them up in 2006 when we finished the basement and they’ve held up beautifully.  I saw the idea originally in Family Fun (see here).  They’re a great way to have the books visible and accessible to my kids and they made great use of an awkward spot behind the door.

And now for the good stuff:

LOWE’S IS GIVING ONE LUCKY CRAP I’VE MADE READER A $100 GIFT CARD!

To enter:

Leave a comment ON THIS POST (on the blog, not on Facebook or in response to your email subscription) saying which room in your home needs some Lowe’s organization help.

Optional bonus entry:

Like Lowe’s Creative Ideas on Facebook.  Leave a separate comment saying you did.

Giveaway is open to US residents age 18 and over only and closes Friday, January 27th at noon MST.  Winner will be chosen at random using a WordPress Plugin (And The Winner Is…) and notified by email.  Winner has 24 hours to respond or a new winner will be chosen…I need the winner’s info before the end of the month!

And while you’re waiting to see if you won, head on over for your FREE Subscription to Lowe’s Creative Ideas Magazine:

Disclosure:  Lowe’s provided me with a gift card to organize my playroom.  The paint and rain gutter projects happened many, many years before I started working with them…I’m a Lowe’s fan from way back.

Basically, you pour some floor cleaner in an ornament, swirl it around, dump out the excess, add glitter, and shake.

I love how they look like frosty snowballs and aren’t super in your face glittery.  If you want SUPER glittery, you can for sure achieve that with a different color of glitter.  Check out these over on Things That Sparkle!

You can watch Kristine’s segment here.

Have you made any ornaments this year?

You’ve seen the fabulous pillows made from feed sacks all over the internet, right?  Pottery Barn had some made from coffee bags, even.  I love them, but I don’t happen to have an abundance of feed sacks sitting around.  OK, I don’t have any feed sacks sitting around and I don’t know where to get them either.  So, I came up with this project to satisfy my love of the feed sack.  Desperation is the mother of invention, right?  And, this tutorial *might* even be better than the real deal because you can totally personalize a faux sack.  What are the odds that you’d find an actual feed bag with your last name (or Santa or whatever) on it?  (Hint: none.)

(I went the Santa route, since I originally developed this project for the A Swell Noel series over at Positively Splendid, but this technique would work for any image/lettering.)

SUPPLIES:

Canvas drop cloth, from the paint section.  You can get a 6’ X 9’ one for around $10.  That’d make A LOT of pillows.
Contact paper, vinyl, or freezer paper.  I used contact paper because it’s cheap and can easily be fed through my Silhouette.
Silkscreen ink.  I like Simply Screen by Plaid.
Sandpaper

HOW TO:

Cut your design or lettering out of your contact paper (or vinyl or freezer paper).  I used a Santa silhouette from the Silhouette download store and then cut it with my Silhouette (on vinyl settings but slowed down to a speed of 5 and a depth of 7).  You could easily do this with a craft knife as well.

Apply the contact paper to your drop cloth.  I cut an 18” X 18” square because my pillow form was 18”.

I used that green scraper thing to get a good tight seal around the edges.

I like to stick the vinyl backing under my fabric to keep the ink from bleeding through and getting on my table.

Apply silkscreen ink with a sponge brush.

I like to use a scrap of contact paper to squirt the ink out onto.

Once the ink is dry, you can peel off the contact paper.

Then, take some sandpaper to your design.

Keep sanding until it looks old and worn and like it’s been part of the canvas forever.

Assemble your pillow (I made a simple envelope back).

And you’re done.

Candelabras: Dollar Tree

Framed prints: Lifestyle Crafts die cuts and letterpress.  How to here.

Subway art: The girls at eighteen25.

Crows: Dollar Tree

Spider web plate: Tutorial here.

Bat banner and bats on frame: Lifestyle Crafts Be Spooked, bats die.  I used the large size for the banner and the small size for the frame.

And, not mantel related, but festive nonetheless:

Have you pulled out the Halloween décor yet?

I was at the dollar store a few weeks ago and picked up some doilies.  (I’m obsessed, even have a work in progress Pinterest board.)  I had no specific plans for them, until Macy walked in after school and said “Hey!  Those look like spider webs!”

I stitched from the center to each doily point and then continued on to the edges of my pillow front piece.

Once the doily was stitched in place, I took some spider rings (also from the dollar store) and cut off the ring part.  I tacked them onto the pillow by sewing around the 2 middle legs on each side, like this,

only with actual thread instead of yellow bars.  Those suckers are on there GOOD and I’m certain they’ll stay put.

Since I already had the orange fabric (IKEA clearance) and the pillow form, this project cost me about $1.25.

Not bad, right?

Do you have Halloween décor out yet?

Have you nailed down costume ideas?

Linking to: Today’s Creative Blog

I’d taken some ratty old thrift store doilies (I’ve recently spotted doilies at Dollar Tree and JoAnn’s, if thrift stores aren’t your thing) and dyed them with Dylon dye.

I told you I was going to make pillows.

Well, I finally did.  And it only took me 433 days.

Supplies:

Canvas drop cloth (or other fabric for the body of the pillow)
Doily (dyed or not…your choice)
Sewing machine and thread

Random blah blah blah about the body of the pillow:  I had an 18” pillow form, so I cut my front piece 18” X 18”.  I used the already hemmed drop cloth edges to cut two 12” X 18” (this was the hemmed edge) pieces for the envelope closure on the back.  If you don’t have a hemmed edge, you’ll want to cut yours bigger to allow for hemming.

I centered the doily on my square of fabric and pinned it in place.

I used a zig zag stitch to sew around the edges and to tack down part of the middle as well.  Since I used matching thread, you can hardly see it.

Here’s a shot of the back, to give you a better idea:

And, that’s it.  Put the pillow together and you’re finished!

Supplies:

Canvas drop cloth (or other fabric for the body of the pillow)
Felt (7.5” X 17.5”)
Sewing machine + thread
Hand sewing needle
Petal template

Random blah blah blah about cutting the petals:  The wool blend felt I bought was 17.5” wide.  I cut three 2.5” strips and then cut those strips into 2.5” squares.  This gave me 21 squares (18 for the big petals, 3 for the smaller center petals).  I stacked the squares 3 or 4 at a time to cut them out.

Random blah blah blah about the body of the pillow:  I had an 18” pillow form, so I cut my front piece 18” X 18”.  I used the already hemmed drop cloth edges to cut two 12” X 18” (this was the hemmed edge) pieces for the envelope closure on the back.  If you don’t have a hemmed edge, you’ll want to cut yours bigger to allow for hemming.

Now where were we?  Oh yeah.  The pillow.

Decide where you want to position your flower on the pillow.  Lay out 6 of the petals like this.  I’ve included my tape measure in the shot, so you can see about how far apart I spaced them.

Pin them if you need to, and then sew them down (in towards the center).

Position another 6 petals for the second layer.  Pin and stitch.

Position another 6 petals for the third layer.  Pin and stitch.

Your 3 center petals are going to be sewed in place like this:

(pinch ‘em like a piece of farfalle pasta)

You can tack them into that shape first, or you can do it as you sew them on.  You’ll want to sew them on with the points lined up with those in the 2nd row of petals.

Put the rest of the pillow together, and you’re done!

My kids just finished up their first year on a traditional school schedule.  We’d been on year round before that, which means summer break = 3 weeks.  This is our first real live 3 month long summer.  I’m loving it, but there are days when “I’M BORED!” comes out of people’s mouths.  So, I wanted to come up with a project we could work on together.  We came up with this silhouette canvas.

Supplies:
Canvas
Old magazines & scissors
Mod Podge
Acrylic craft paint
Stain (optional)
Sandpaper

First, you’re going to let your kids go nuts cutting up magazine pages.

(The kid on the table in pajamas in the middle of the day in the background is totally optional.)

We tried to pick pages with a lot of color (as opposed to black and white text), but that was really the only direction I gave them.

Once you have a whole bunch of cut up magazines, you’ll want to Mod Podge them to a canvas.  There’s also no rhyme or reason to this, just make sure you cover the entire canvas.

No need to have a panic attack that everything’s not smooth…some lumpy/puckered/not perfect parts are encouraged!

Once it’s good and dry, trace your silhouette with a pencil on the canvas.

I went with this bird on a branch design from the Silhouette library.  I think a big initial or monogram would look fabulous as well.  Or how about a chevron pattern on the whole thing?  (That was for you, Jen )

Once you’ve traced, you’ll want to fill in the rest of the canvas with craft paint.  There are no pictures of this step because my daughter/back up photographer and I were both doing the painting.

YOU CAN ABSOLUTELY STOP NOW.  I like this look and I probably would have stopped now if our silhouette had been something more graphic.

I decided to take some sandpaper to the painted area so that some of our magazines would peek through.

Again, YOU CAN ABSOLUTELY STOP NOW!  There’s really no wrong way to do this…just go with what you like!

I applied some stain next.

I put it on streaky and wiped some off.

YOU CAN ABSOLUTELY STOP NOW.

I, however, did not.  I watered down a few more shades of acrylic paint and did some more streaking (not that kind…what kind of blogger do you think I am?) and a little splattering.

YOU CAN ABSOLUTELY STOP NOW…because I totally did.

Keller threw a (plastic) bottle of Mountain Dew at his sister (because she’d dropped it in the toilet).  He’s not a very good aim, and this happened:

(Let’s not even get into the part where a piece of glass got stuck in the top of my foot and it bled for close to an hour, mmmkay?)

That’s my sewing room light.  It’s what the contractors included in their bid when they finished our basement.  And, it’s BORING.

I decided to take this opportunity and girly up the lighting in there a bit.

And a non-illuminated shot:

Cute, right?  I guess sometimes kid fights aren’t the worst thing ever….

This chandelier is another DI score…$2 whole dollars! I added some cream spray paint and these amazing magnetic pink crystals I found on clearance at Hobby Lobby and, voila! A dainty little chandelier!

It is screaming for some little lamp shades. I have been visiting Hobby Lobby weekly and buying them out of lampshades similar to these self adhesive, cover–it-yourself lampshades. Apparently they only stock 2 at a time?

This lamp is another DI find:

The lamp post was cute, so I spray painted it cream but the shade that came with it was pretty beat up, so I bought a “cover-it-yourself” lamp shade from Hobby Lobby and came up with this.

And of course, the name art.

Char actually did most of the work on this. (Char interruption: That is not true. Jami was the mastermind, I was just the man power.) I LOVE the way it turned out. Here is a better picture, minus the frilly iron decor above it.

The room is small and there wasn’t really room for a traditional changing table.  My fabulous neighbor Decorator Wendy came up with this solution:

Handy to have a laundry basket underneath for all those newborn blowouts, right?

And then I hung the diapers and wipes bins on the wall above it.

Who wants to tell the cat her days of hanging out in here are numbered?

-Jami

Most of the curtains are done, I just need to finish the valance portion.  Look forward to that project next week!

-Char

Jami picked up a damaged Pottery Barn Kids bumper at our local Down East Home store for $10 (cheaper than buying new batting, right?) and I recovered it.  It was all one really, really long piece and stuffing it inside the new cover would have been a nightmare, so I cut it into 4 pieces (one for each side).  I measured each piece and added 1′’ for seam allowances.  I’m not giving you specific measurements for this because your bumper may be a different height and/or thickness.  The top and bottom ruffles are 3” strips pressed in half and then ruffled with my ruffler foot.

I put large ties (5” strips, sewed RST into a tube and angled on the end) on the corners and a small tie on the top and bottom centers of each long side.

The bumper fabrics and the yellow for the ties are all Amy Butler fabrics.

The green ruffles are Heather Bailey.

The houndstooth on the sheet is Free Spirit.  I used Dana’s tutorial for the crib sheet.

And someone remind me to head over to Jami’s to photograph her nursery in the afternoon next time because no pregnant woman should ever have to do this to help you get a good picture:

Or maybe I should just finish the window treatments next…

You’ve heard me talk about my insane neighbor Jami before, right? Hint: The Smelly Barn Adventure™. After 3 boys, Jami’s expecting her first girl, and I’m lucky enough to be sewing the bedding and helping her execute the awesome ideas she comes up with. (We joke that we’re going to buy land with a barn in the country and have sleep over craft retreats. She’ll come up with the ideas because she’s WAY more creative than me and I’ll figure out how to make them happen.)

Do you see that freaking amazing wall treatment? We’ll talk about that in a few days. After I posted the preview of this project on Facebook, I received several emails asking about how she painted the furniture. We’ll talk about that, too. Be patient. Today’s just the name art.

Jami picked up a framed picture at the DI (thrift store) for a couple of dollars. She picked it based on the fact that the shape was good for spelling out a name. We pried the print out of the frame using butter knives and then flipped it over so that you couldn’t see the print through our white on white backing fabric. If your frame doesn’t have a print in it, you could cut some foam core or cardboard and accomplish the same thing. We applied the fabric to the print using spray adhesive.

We figured out what size we wanted our letters and cut a test run with the Silhouette on notebook paper. You could ABSOLUTELY do this project without a Silhouette, you’d just have to cut the letters by hand. And unless you named your kids something long (like Charlotte…thanks mom), it won’t take long.

Because I know people will ask, the fonts are:

L – Big Top
U – Mixed Up, it’s the capital U
C – Oliver
Y – BoyzRGross

Once we were happy with the size, we got out Silhouette’s new fabric interfacing. We used the clean cut (stronger adhesive, not machine sew-able) because this project isn’t going to need to be washed or handled and we wanted the stronger adhesive.

We applied it following the package directions and got cutting.

We had the Silhouette double cut the letters, just to be safe. Look how nicely it cut!

After we had all the letters cut, we positioned them on the backing fabric

and ironed them in place.

Then we folded the edges of the backing fabric around to the back and secured them in place (more spray adhesive).

Jami hot glued some jumbo ric rac along the groove in the frame.

And…

Then she called me back to say she’d hung it, so I went back for a couple more pictures.

(Thanks to our other fabulous neighbor, Decorator Wendy, this is where it’ll stay.)

MARCH SILHOUETTE PROMOTION:

Silhouette SD, one of each fabric interfacing (clean cut & sewable) and a roll of white flocked heat transfer material for $229.

If you already have a Silhouette and want to try out the interfacing, you can get 25% off.

The March promotion will run from the 21st through the 27th.

Code “CRAP” will let you take advantage of either of the deals.